I use the Pro Spektrum equipment but found that when I ran in in my 1/8th cars I was fighting the system as it would lag behind my inputs and sometimes go into the failsafe around my local track. I tried everything from changing receiver, tx module, changing the whole tx, trying NiMH and Lipo receiver packs but when I installed a power cap into the receiver all of these issues went away. I found the same when I ran the same equipment in my X-5 and the adding the power cap and everything was fine. I also found that as I moved away from my TX with the car and pushed the front wheels hard the servo would move away from centre and then back again no matter what servo I used. The fix for this was to use Futaba FAAST and I have not had the same issues at all only a heat problem in my Xray 808!
I now use Futaba FAAST in my 1/8th and Spektrum for 1/10th.
I currently have a Spektrum Micro receiver in my Durango and have the PT mounted on its side and have not had a problem with missed laps.
__________________
Schumacher KC, KD, CAT XLS, CAT L1 | Team C TM2 V2, TM4, TC02 | JQ The Car | Mugen MBX6 | Losi 8T,8BE 1.5 | Durango DEX-410V4 | FTX Blaze | XRAY M18T | Kyosho STR,Surf Dude,Nexus 30 | Nimrif Makara | MFA Spear | She Devil | T-Rex 450SEV2,250SE | Ark X-400 | Protech Butterfly,Zoom 400 | Ikarus Piccolo | VW T4 | Smart 450 | KC-250 | BoltRC Kraken 5" | Emax Nighthawk 250 | Gravity 250 | S550 | Prusa i3 | TronXY X5A | Must stop collecting stuff!
|