[Adam Skelding]

Originally Posted by deepdale11

I find it disappionting that spending all that money on a professional buggy that we need to do these things to make it work!!

You don't have to.
Some people just do it, from experience with 8th scale. It's belt and braces.

The most common problem is the CVD's haven't been assembled properly. My tip is to mark the flat on the CVD pin with a little tip-ex. So when you assemble the CVD's you know you are tightening the grub screw against the flat in the shaft.

My CVD's only got taken apart before the last meeting I went to. That's 13 meetings without the pins even budging.

Build it right once and you won't have to do it again...

Simples