Any suggestions at all?
I found this on Petit R/C and it looks like a good place to start.
Front:
35 wt, #2 piston, silver spring, middle on tower, outer on arm
1-A link with one washer, 25 deg blocks -1 camber
Rear
35 wt, #2 piston, silver spring, inside on tower, outside on arm, 1-B link with no washers, 2 deg antisquat, -1 camber.
Ride height set low with front arms below level and rear dogbones at level or slighly below level.
Setup recommended no foam inserts in front stagger ribs. My tires currently have foam and I will need to test with and without as removing the foam inserts in the fronts may give me some additional steering I'm missing now.
Also would changing from Yellow to Blue rear tires be something that you do on carpet tracks on your side of the pond?
