Quote:
Originally Posted by Big G
mine seem to sit about the same both sides. once it's on the floor they're a good mm or 2 into the outdrives.
do you have weird camber?
|
Don't think the Camber is too weird. Maybe slightly less than 1 degree but not too mad!
Quote:
Originally Posted by Richard Lowe
It can change depending on how you have the diff shimmed, my BJ4 is never exactly the same each side. As long as you have the same droop each side it's ok  |
The droop is the same and the diff was rebuilt the other week and shimmed as per the manual (unless I got a bit carried away and stuck them all on one side...
). Might just check that tonight...