Quote:
Originally Posted by T4miy4 Guy
Just after some advice regarding the double slipper!
I have this fitted to my DB-01 and the front and rear diff`s are upgraded to 501 out drives with ceramic balls.
From a hard start off the line at full throttle my DB-01 pulls frantically to the right... is this the fact that the slipper is set wrong ie to lose or is it that one of my diff`s is to lose or to tight?
Any advice lads?
Cheers Andy
|
It most likely the arms height, check that the front arms are exactly in the same height.
Also, if one of the shocks lacking some oil it can cause this problem.