List of things to check:
1. Are the wires on the servo in the same order as on the speedo?
2. Have you tried re-binding your receiver and transmitter?
3. The servo is in the correct plug in the receiver?
4. Have you tried using the speedo setup box to check the speedo program works?
5. Have you tried a different servo?
6. Do you have the capacitor hooked up to the speedo properly?
7. Have you tried a capacitor in the receiver?
8. Is your personal transponder too close to your receiver?
If you need a different servo to try I can lend you one in Langenfeld this weekend. Either low-profile or normal.
__________________
|