ok, I've had a look around and put together a list of things I need to do to the RTR to more or less make is an SP, apart from the chassis which I'll change later to a carbon fibre one. I've not planned to replace the shocks, as I've already replaced them.
W5201 x1 - Front wheels
LA254 x 1 - Steering knuckles
LA255 x 1 - Front & rear A-arms (full set)
LA252 x 1 - Rear hub
LA257 x 1 - Front universals (these seem expensive at £30)
LA258 x 1 - Rear universals (again, £30)
LA256 x 1 - King pin
UM129 x 1 - 4.8mm ball shaft
W5194-01 x 2 - Plastic shock parts
1368 x 1 - Hex screws
1378 x 1 - Hex screws
The above seems to be what I need to sort out the suspension area, apart from the shocks.
I'd also like to replace the plastic shafts on the car to the metal ones, I'm not 100% certain what parts I need for this, but from comparing the diagrams I think I need the following;
LA201 x 2 - Steel differential shaft set
WBD04 x 2 - Pressure plate set
LA223 x 2 - One way shaft
96647 x 2 - Shim set
BRG014TS x 2 - Teflon bearing
Can anyone confirm if I'm missing anything.
Also, where's the best place to buy all of this?
|