Ashley
I had the same problem with the Idler being to close to the wishbone at full suspension compression so if you look at my pics in detail you will see i have removed a small amount of the front wishbone just with a dremel. Just means the wishbone now does not hit the idler but make sure you us a spacer on the rear of the hinge pin so that the hinge pin has no slop and can't hit the idler.
Hope that helps
Si
__________________
Si Reeves - Herts Rc models - Schumacher - Beta - Spektrum - Rudebits.co.uk - SMD - Insideline Racing
|