Quote:
Originally Posted by rcardoso
trap, try one thing. Dont know well how to explain but here it goes.
You have 2 bearings next to the pinion, right? Try to give the most distance between then by unscrewing the 310027 part a little push it far from the pinion and screw it again.
Say if it worked.
|
I have already tried to push the bearings as far apart as possible. It didnt do anything to stop the binding.
I took everything apart piece by piece and found that the shims in the front diff and spur (side connecting front drive shaft) needed to be removed. Those are the only things that made a difference. It is a little smoother but not much. My temps are still high but it takes a little longer to reach 5-6 led's