Quote:
Originally Posted by vinny
here is mine. with the gp 5000mah brac approved lipo.
10 double, 18 pinion and 83 spur. id be lucky to get a anything bigger on, with out hanging the lipo out the side, and then making it impossible to put the positive plug into the lipo through the purposly cut hole in the top deck.  |
Looking at your picture the lipo strap should be down the centre of the battery so that it covers the balance socket. Your pack is pushed way too far into the centre. I use Vampire 5200 sticks or Demon 5000 (now non brca legal) stick packs and they fit find. My motor clamp is way past the split pin holder for the lipo pack. I has the NiMh chassis which I have dremeled at the front for the Vampire racing lug to locate. You do need to have 4mm connectors that allow you to solder the wires so that they come out at 90 degrees to the male plug otherwise they will not fit under the top deck.
__________________
Schumacher KC, KD, CAT XLS, CAT L1 | Team C TM2 V2, TM4, TC02 | JQ The Car | Mugen MBX6 | Losi 8T,8BE 1.5 | Durango DEX-410V4 | FTX Blaze | XRAY M18T | Kyosho STR,Surf Dude,Nexus 30 | Nimrif Makara | MFA Spear | She Devil | T-Rex 450SEV2,250SE | Ark X-400 | Protech Butterfly,Zoom 400 | Ikarus Piccolo | VW T4 | Smart 450 | KC-250 | BoltRC Kraken 5" | Emax Nighthawk 250 | Gravity 250 | S550 | Prusa i3 | TronXY X5A | Must stop collecting stuff!
|