Quote:
Originally Posted by mark christopher
i have Nathens set up here (2nd overall)
its for RRCI report but ill let it out to help the durangoers out 
Worksop Indoor Setup
Front Shocks
2 hole pistons drilled to 1.3mm
30wt oil
Dark blue springs
Outer hole on the wishbone
Middle hole on the shock tower
Boots and 2mm droop restrictor fitted
Rear Shocks
3 hole pistons drilled to 1.4mm
30wt oil
Light green springs
Middle hole on the wishbone
Middle hole on the shock tower
Boots fitted
Front Suspension Geometry
1.5° Camber
1.5° Toe Out
Camber link: Outer hole on the caster block
Inner middle hole on the shock tower
Furthest forward hole on the ackerman plate
19mm ride height
No roll bar fitted
Rear Suspension Geometry
1.5° Camber
1.5° Toe out toe out on the rear???
Camber link: Outer hole on the hub
Inner top hole on the shock tower
Maximum droop
19mm ride height
1.5mm roll bar
-2 front hinge pin bracket
4 rear hinge pin bracket (3° anti squat)
0° toe in blocks
Diff Oil
7000 Rear
12500 Front
General
Full weight kit fitted
LRP X12 6.5 Geared on 21/87
Schumacher yellow mini pins with Schumacher green inserts |
marrrk are your sure thats right check the red high lighted bit