That was the setup I put on the car, followed it to the letter, set shocks up to the right lengths etc.
Was running the arms towards the rear and the rear hubs towards the front, like it says on the sheet..
Glued the servo saver rock solid...
Was running 1mm shim under the inner front link... As for ride height, arms level at the front and just about level at the rear IIRC. Was thinking at the meeting that the E-speed hangers might help, but probs not enough i recon.
Tried several tyre types, just seemed to alter overall grip rather then balance.
Cheers for you help everone
Ben