Hey guys since Losi cant make a SCT like it should be i decided to mod my CR truck into a SCT.
Here is some pics of what i have done so far.
Well i made some progress this morning. I took a piece of scap plywood i had with melamine on one side and squared it up to use for a chassis guide board.
Here is a few pics im going to end up stretching the tub first getting it all squared away and then start making the C/F chassis.
Here i have screwed the T-plate to my board and squared it up to make sure everything is straight.
This pic shows exactly how much it will be stretched when i graft the two tubs together.
This pic is of the chassis at ride height.
I will be getting another chassis today and hopefully have the two grafted together later
Ok i got the chassis cut and grafted together. If anyone is going to attempt this and you have a chop saw or a mitre saw this will be your best benefit.
The first two pics show the two chassis cut at the proper points.
The next pics show the truck assembled as a roller.
The sanded parts on the side of the tub are going to get either G4 or some aluminum stiffener bonded into the tub for strength for now.
Please excuse the Associated shocks for now my Losi shocks are on my Sc10 and will soon be put back on this truck
Pic with the body proped up for a visual
