Quote:
Originally Posted by DaveG28
Yep B4 mounts!
Can't really move the electrics back at all, though I could maybe squeeze the receiver over more or on it's side, and then centralise the esc more. If I can avoid the battery posts I can move it back a bit more then.
Tbh I think I need to try other servo's, and go low profile just to keep the space easy! I could then move the servo back by dremelling the servo mount, though I'd likely cock it up!!
May have a servo or 2 for sale soon!!
|
I use a Savox with B4 servo mounts and a losi servo horn. I dremelled off about 6mm from the front of the servo mounts, this allows me to move the servo backwards and gives enough room to clear the problem. I had to use shorter screws to hold the servo in place or they foul up on the screws that come up through the chassis to hold on the servo mounts. Pain in the neck, but cures the problem
