This should be a good starting setup:
24t pinion/78t spur with 7.5 brushless sintered motor
schumacher medium foam inserts with schumacher minipins all round
1-2 negative camber
wishbones level at front, dogbones level at rear
silver springs front and rear
35wt oil upfront with #2 piston & 30wt oil in the rear with #1 piston
big wing (6.5" or 7") Jconcepts & edit wings seem to be good
front shock position - middle on tower, outside on wishbone
rear: middle on tower, inside on wishbone
trishbits brass bulkheads front and rear are a nice addition to have too if you got the cash to slash for them
