[spenner]

Euro's Setup:

Rear
Red spring with compensator spring
middle hole on tower
New hole in shock mount (more droop)
17mm of shock shaft showing
Old piston's drilled to 57 hole
32.5wt oil
Hubs high
Roll bar in short link (rear hole in wishbone)
wing forward no gurney
toe-in 3 degs
1 deg camber
Wishbone level
Antisquat - Standard brace

Front
Spring - Blue
Old piston drilled to 57 hole
Oil 32.5wt
New position on wishbone using blue servo mounts and hole drilled at edge of webbing
push rod turnbuckle - mounted on top of yoke with cone spacer also
top wishbone fully back (max caster)
ride height - wishbones slightly sagged
camber 2 deg
No toe in/out
Front hubs modded and mounted low

Extras
20g under front shocks
5g to space speedo from shaft
6 x 5g to along spine to space lipo fromt shaft
Trakpower 4900 - approx 280g
Motor Tekin Redline 5.5 geared on 21/72
Tekin RS Pro mounted up front to get weight forward
Diff front and rear, locked prop.
Bumper cut down
Front hinge pin holder filed down and rounded in the middle.
Team xtreme 'Hot weather' wheels
Schumacher Yellow mini spikes
Trishbits foam inserts