When i build a diff i just tighten it so the tension is on the spring not tight spin the diff etc then tighten spinnig the diff between each tighten.
Going to order new spring and thrust race. Might go change the diff gear.
Im pulling at straws now could be a damage screw. I thought at first bearing inside the diff not seated properly. But those seem to be seated fine. Im thinking change the diff gear as the bearing in the diff gear is a tight fit to put in. Tighter than normal.
A
__________________
Ashley Williams
I always thought by 2013 we would have flying cars, but we have got blankets with sleeves!
|