Hi
Selling on behalf off a friend.
has been very well looked after , Its in mint condition.
All boxed with manual.
SUPER SPORT SPEED CONTROL FEATURES 4-7 cell input voltage6 user-selectable throttle programs:- SS STANDARD (forward/brake/reverse) — Unlimited rpm and acceleration
- SS STANDARD (forward/brake) — Unlimited rpm and acceleration
- SS HIGH (forward/brake/reverse) — SS STANDARD with higher minimum brake
- SS HIGH (forward/brake) — SS STANDARD with higher minimum brake
- SPORTSMAN (Limited rpm and acceleration) — with reverse
- SPORTSMAN (Limited rpm and acceleration) — forward and brake only
- Fits in popular 1/10 scale electric R/C carsSize: 1.32" x 1.75" x 1.05" (w/heat sink); Weight: 1.7 oz. (w/out power wire)Variable Throttle Step Technology for the smoothest performanceThe One-Touch/Programming Button, along with a series of four different-colored LEDs, easily guides the user through the profile selectionIndustry-first Transmitter Check ModeLocked Rotor Detection Circuitry prevents motor, battery, or ESC damage
Direct-solder wiring tabsReplaceable input harnessHeavy-duty BEC
One-Touch Set-UpSS5800 BRUSHLESS MOTOR FEATURES
Virtually maintenance-free: no brushes, brush springs, or commutator to true or wear out
Completely enclosed motor provides protection from the elements
Sensor technology provides excellent starting torque and continuous synchronization for great, low-speed driveability, vehicle control, and consistent, accurate brakes
Standard 540-size car motor with a 1/8" diameter hardened output shaft to accept all existing pinion gears
High performance design: Kv=5,800 RPM/Volt; Kt=0.45 in-oz/amp; Power output: 196 watts (See above for definition of Kv and Kt)
Pre-wired and ready to install
Low cogging for smooth acceleration and smooth coasting (See above for definition)
Ball bearings for smooth, low-friction operation
Direct-solder wiring tabs for easy wire replacement
One-piece, multi-pole cylindrical neodymium magnet for high reliability, and stationary windings for better heat conduction over brushed motors
For more info see
http://www.teamnovak.com/products/br...rt/ss5800.html
£65.00 posted
Thanks
Ben