[gazhillAE]

B4 bar kit here!

Pics!!!!

Depending on if you are using the Espeed hangers will depend on whether you mount the roll bar high or low.

you need to try and make sure if possible with the wishbones level that the anti roll bar connected is level aswell.

You will have to cut the small screws down that the ball joints mount to to adjust this so when its connected its level

Make sure that the bar doesnt rub too much on the ball studs when it goes up if at all! RPM ball ends are to thick and will catch from experience so i changed for JConcepts ends!

As per my pics!