[VinceVegaUK]

Hi all,

I bought a Front and Rear associated spring set for my Durga as they offered more range and I was told they’re better than the tamiya ones. At the moment I’m running Plastic dampers and the rear bore is larger than the front so the rear associated springs are a very tight squeeze.

I do plan to get some alloy dampers soon. Do the DB01/501x alloy option dampers work with the associated spring set?

Any recommendations on a good setup, my friend and I struggled a little this weekend but got better through the day.

I’m running 40w front with 1 hole and silver springs set full vertical, and i’m running 30w rear with two holes and green springs set as flat as possible. Its working better now but with the tight fitting rears there sticking a bit and i think i’m loosing a bit of droop. Im also on the stock tamiya K type tyres and was grip rolling a little hence the stiffer more vertical front setup, it seamed to work.

I’m running on NiMh too so im fully weighted

Thanks

Later

VV