View Single Post
  #1  
Old 24-02-2007
jim76 jim76 is offline
*SuPeRsTaR mEmBeR*
 
Join Date: May 2006
Location: ruislip
Posts: 2,890
Default atomic carbon ATOM milled chassis for ZX5

Hi

I'm selling my spare atomic carbon chassis for the ZX5. This is the original milled ATOM chassis, not the ION chassis that currently sells and was reviewed by Jimmy.
This chassis is about 0.5mm thicker and has the cell slots and motor area milled out as can be seen.
Advantages being no dirt in your motor, and an amazingly rigid chassis for improved handling.
If you suffer a lot of stripped gears then this could be your answer. The main reason for stripped gears was flex in the old chassis during hard cornering which resulted in the gear box halves coming slightly out of line and the gears not meshing right. This chassis will not flex AT ALL. you physically can't bend it in your hands.

these were a very limited run from atomic and sold for £100 when they came out. THe current model sells for £67.

As i said this is my spare chassis, i have two. this one has only seen the track for about 3 races when i lent it to a friend who snapped his kit chassis.

yours for £45 posted 1st class recorded.

thanks

__________________
4wd - X4TE
2wd - X2C (Mad Rat passed down to son!)

Ansmann Racing UK


RIP - MicroTech Racing

Trader Feedback