[niggs98]

Originally Posted by JCJC

Post Christmas assembly, page 17 and front differential. we have assembled both ball diffs the same, as standard diffs, just assembled 21 page 17, when assembled "for differential spec" it seems to have a one way-ness about it, when assembled for "front one-way spec" the drive is locked and will brake the front wheels when braking...... am I confusing more that just myself with this one?

Jordans dad.............

i can only assume that you have put the one way bearings in the wrong side, reverse them and it will be as per the instructions, without being rude if you reread the distructions it will tell you which side the writing goes on the bearings in the oneway, as per spares, the usual wishbones, and pivot pin carriers ( with these u also get the gearbox housings and shock mount mounts that you will need), the only other thing we have broken is the front chub although in all 3 case's the spare's spruce is aprox 5 quid so hardly expensive ( if you need part numbers just ask). as for springs i use orange fronts yellow rears on low grip blue rears and yellow fronts on grass and green rears and kit fronts on high grip