Hi Brent,
We still have some pretty good levels of XX spares in stock (not all listed on our website)
We "should" have a gear cover, definately got most of the spur gears still.
XXX wheels will "fit" but you get clearance issues, the font wheel is wider so it fouls on the hub, the rear wheel with its extra width also hits the highest hole on the original XX rear hubs but you may get away with it on "CR" hubs.
XXX threaded shocks are all the same dimensions in bore etc, the front shocks are also the same in length but the rears from a XXX (0.9/1.0) will be shorter than those used on a XX (1.2/1.2) - the two numbers in brackets are the shock shaft and shock body lengths.
If you need help with XX bits either look at our website or call the shop somtime in the week
Darren
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER
AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF
AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI
X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ
TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|