[alien.46.uk]

Hyper 8.5 Pro

Extremely good condition, only had 30 mins use by previous owner and only an hour at the max from me. Selling on again as I think I now want to upgrade my PC and with my new job being on Friday, Saturday and Sunday Nightshift, I just don’t have the time to get down and race on a Sunday and the week is used up sorting general lifey things out.

I’m quite sad to have to sell this one (and the H7 PBS) as well as I’ve only just got back into RC and put a lot of effort into both of the buggies I have and really wanted to get involved in Racing, but without the time to, they seem a little pointless. Hopefully when I can sort a usual 9-5 job, I can look into it again, watch me get one a week after I leave now!

First are the Standard Features of this buggy:

·6-Gear Spider Diffs
·FR2 Extended Main Chassis
·FR2 Extended Chassis & Engine Brace
·CNC Aluminium 43mm Engine Mounts
·CNC Aluminium Arm Holders Front & Rear
·CNC Aluminium Servo Arm
·CNC Aluminium Lightweight Wheel Hubs
·CNC Aluminium Dust Proof Wheel Nuts
·CNC Hard Aluminum Big Bore Shocks
·CNC Aluminium Clutch Shoes
·CNC Aluminium Lightweight Flywheel
·Machined Lightweight Clutchbell
·Titanium Turnbuckles
·Airfilter Support
·All 5 Available Anti-Roll Bars
·Dished Racing Wheels
·Angle Spike Tyres
Included with this buggy is:

• Picco P3-B .21 Buggy Engine (Extremely good condition, plenty of compression, few marks and will hold itself on the flywheel nicely).
• Jammin JP-2 Pipe (Only used on this buggy, so less than an hours use)
• BNIP Crowd Pleazer 2.0 for H8.5 Shell
• Ansmann Racing Hi Downforce Rear Wing
• 1000,3000 and 5000 Wt Diff Oils
• Core RC 1400Mah Rx Pack (Hump)
• Specktrum Z590 Servo on the Throttle and Brake
• Bluebird 630MG Super Torque Servo (Few Months old)
• Acoms Technisport 2.4Ghz Tx and Rx Set-up (Batteries too!)
• Brand New White Shock Springs
• Brand New Red Spring Covers
• Brand New Yellow H8.5 Pro Wing (Fitted)
• New Filter Outer and 1 BNIP
• New HN Muffler Rubber Gaskets
• 2 Big Wrenches (1 4-Way, 1 5-Way)
• 1 Small ‘T’ Wrench
• Fastrax Glow Ignitor and Charger
• Ansmann Racing Clutch Tool
• BNIP M-Troniks Micro Failsafe
• Fuel bottle
• H8.5 Pro Shell Painted Red
• All Origional Manuals, Leaflets, Parts Lists and other literature
• Acoms Technisport 2.4Ghz Manual
• BNIP HN Red Shock Springs (Work extremely well with the 8.5 Pro)
• Tube of 8 Clutch Bell Bearings

It also comes with 3 sets of Wheels and Tyres:

• HoBao Angle Spikes on H8.5 Pro Dish Wheels
• Medial Pro Vega on 15-Spike Wheels
• Pro-line Crim Fighters on HN Dish wheels

It has 3 boxes of spares including:

• 2 Sets of low arms
• Hubs, Front and Rear
• Front or Rear Diff Housing
• All the optional Extras included with original H8.5 Pro
• Many other spares and bolts, screws and nuts

Will also Include:

• SMD High torque Starter Box (Blue one)
• 2 x 4000 Mah 7.2v Stick Packs for Starter Box
• Ansmann Racing Starter Box Bag
• Wiring Loom to allow SMD to run off Car/Bike/Leisure Battery

As you can see again, there is a lot of kit included with this set as well and overall over the past few weeks has cost me far more than I’m going to ask for it all.

Will also come in its original Box.

If collected I will also throw in a BNIP bottle of Byron Gen2 25% fuel (1/2 Gallon Tub), oh and I nice cleaning brush.

Price: £260 Posted