only selling as i need more hyper parts
i like my cars to be very clean
it has been stipped and cleaned after every run so most parts look new!
just had all new diff re-builds(2000,5000,7000),new shock oil,alloy hinge-pin holders and alloy knuckles
almost a complete chassis in parts with re-built shocks and another full set of diffs,spare pipe/manifold ect.
it will come with a hitec 695mg servo,hitec standard for the throttle,AE micro reciever(27am) and the original engine(just had crank main bearing and ported sleeve)still plenty of compression left and the pullstart works fine.
ideally it needs a new clutch,flywheel and clutch bell,it does have these but not right for this car and a reciever pack(hump)
after £100.00 ono via pp gift and collection from sixfields rc,i will post but at extra cost as there is alot of stuff!!
also selling my spare hpi .25 engine,the carb is missing a lower collar so i have put some sealer in there to prevent air leaks(this does not affect it and the carb is still tight in the block)
its got a brand new hpi pullstart(20.00 and pulled once to test)it has very good compression
£50.00 via pp gift posted