so what I have tryed.
on the rear oils from 25 to 35 singel and dubble drild pistons.
low and high roll center.
every position on the rear rocker arms.
the front the same more and less caster .
puchrods on top off yoke or on the bottem.
and this is how I ended.
front caster 3 shims on the rear off the upper arm.
puchrods on top of yoke .
shocks oil 40 new piston.
yellow springs
0 degree camber .
the rear bottem hole off hub ( low rollcenter to give more drive)
shocks in the middle position on rocker.
oil 35 new piston
red springs
0 degree camber
I think thats about it.
the car feld good at several moments but wasent fast at all.
whith the last setup the car was lose at the rear too lose but its averidge whas axepteble.
any help would be great
__________________
topspeed modelshop
Ralls racing
Rc-speedhouse
Rude-Bits
Serpent
Fba section offroad chairman.
|