View Single Post
  #2  
Old 16-06-2009
Marvin's Avatar
Marvin Marvin is offline
Senior Member
 
Join Date: Jun 2008
Location: Maidstone
Posts: 871
Default

Here's one big pile of stuff, about to become a car!


That's:
  • D8 Kit
  • 2 Battery Trays from RC-Monster
  • 2 18.5V 3300mAh Hyperion 25C Lipos
  • 1 MMM ESC
  • 1 Neu 1509 2Y Motor
  • RC-Monster Motor Mount
  • Futaba BLS-451 Servo
  • Tekno-RC D8 Conversion Kit
The quality of the machining on the Tekno-RC chassis is very good, in fact, it's not dissimilar to the stock one.


Anyways, let's crack on with the build:
The top-down servo saver is a nice feature, and the steering posts key into the chassis, so you can remove the screw from whichever end you want, rather than it choosing for you. Otherwise it's standard fare.

Another pic of that quality machining. Note that the side guards don't use nuts for the screws to bite into - so no losing them in maintenance, though if one strips, it's a new side guard .

I kind of forgot to take any pics of the diff, but it's all pretty normal in there anyway. Though the pinion and ring gears are helical cut.


Steering arrangement is a 'backwards' C-Hub - the idea is lifted straight from the smaller scales. All plastic here, but it seems strong and durable.

Wishbones have webbing which keeps the suspension components a bit cleaner.

All put together, note captured hinge pins.

Nice thick alloy braces, again with captured hinge pins.

Jumping forward a bit, here's the centre diff put together, the machining of the RC-Monster motor mount is exceptional as always. Unlike my cut out for the spur gear *laughs nervously*.


A mock-up of the layout:

Then, to be honest, I forgot about pictures and stuff , so the next ones are of the finished article:

It's a little like spaghetti junction in there to be honest...

...but it's all needed.


Now, I'm sure you're wondering about balance and the overall weight. Truth is, this is pretty heavy, it's a touch over 4kg, which is approaching Truggy weight, and it has a rear weight bias. Though it has to be said that a heavier car does normally mean it's more stable - which helps with this much power on tap . Also, the rear weight bias helps rear end grip - something you're always after at the track I race at.

I'll leave you at peace from my ceaseless waffling with some pics of the bodyshell... Enjoy!

__________________
Reply With Quote