[stegger]

From the B4 setup manual

• Changing the length of the camber link is considered a bigger
step than adjusting the ball end height on the tower. (Adding spacers
under the tower’s ball ends lengthens the camber link.)
• Longer camber links are typically used on high grip tracks, fig.
2. The inside (longer) camber position is the standard position and
works best at most tracks.
• Shorter links tend to work better on medium-grip, loose dirt
tracks, fig. 3.
• Lengthening the camber link (or raising the ball end) will tend
to give more corner entry steering and take away mid to exit steering.
• Shortening the camber link (or lowering the ball end) will take

away corner entry steering and add exit steering.