Quote:
Originally Posted by Urzrkymn
Hi, I'm having difficulties calibrating my Tekin RS with my Futaba 3GR radio. I start the calibration process and the ESC finds neutral, I press full throttle - nothing, full reverse - nothing. If I reverse the throttle on my radio and try to calibrate the ESC finds neutral and full throttle but no reverse. Any ideas?
|
Hi Mate
I also Have a 3GR and found that it it took some time to get the Tekin Rs to sink with the 3GR and that the brakes felt odd- its the handset not the Teink as my Sanwa was fine first time.
Have all the hand set Throttle/ brake setting on 0 appart from the End point- set this to MaX FOR Both throttle and reverse- make sure your ABS is on Factory settings
Put the brake settings on 95% = 100% on the speedo
you will need some drag brake i found as well with the 3GR ive got about 20% on thre Rs
once you have sinked the Rs with the handset- turn down the brake Endpoint on the hadset untill the brakes feel right for
you
once you have done this you might want to look at the trottle trim so that there is no low end delay and that the throttle end point isnt pulling full throttle in to soon