Quote:
Originally Posted by mark christopher
so in comparason, how many servos cause a speedo to fry
|
That statment is quite correct actualy, a servo can blow a speedo, by having an incorrectly adjusted servo, under certain conditions, can spike the BEC circuit of the ESC, this fails, then the ESC goes open circuit and blows the FETS.
re: connectors, a well maintained gold plated corally/deans is just as good as a solder joint, unless you suck the solder off each time, and solder adding fresh solder each time, then you might have an advantage, of maybe half to a quarter of the on-power resistance of a decent new FET....