Quote:
Originally Posted by radwerx
Do you know if I might need to add any additional parts to make the slipper kit and the shock kits work?
Was thinking I might need new cups from the D4 for the aluminium shaft in the slipper kit to fit the Cyber 10B.
|
No additional parts required for either the slipper or shocks that I can see.
To install the aluminium shaft, you'll need a front gearbox CVD from the D4 and possibly a CVD rebuild kit.
The thickness of the aluminium shaft might pose a problem for the rear center shaft. My lipo (Intellect IP3800) barely clears the standard shaft - the extra thickness of the D4 one I believe will cause it to rub.
Just discovered the rear shaft coupling touches the battery. Had to push the lipo all the way forward and add extra foam to keep them apart.
I suspect the problem is the battery has some raised edges designed to mimic a NIMH pack. It increases the overall height of the lipo.