[Adam Skelding]

Originally Posted by leinad

Hi Adam... is it safe to say that as long as the length of the turnbuckle is the same as the one stated in the manual, it's safe to use on the Cyber 10B? Am actually looking at the titanium set for the Cyber 10B from HPI, but have no idea where to purchase them from.

The length of the turnbuckles in the manual should be pretty spot on for the positions used. There is always a litle difference between kits due to compounding of tolerances in each part. It could be a maximum of +/-0.5mm.

Best thing to do is set the camber as you can measure this.
The set the steering turnbuckles to get your wheels straight. Always do these with the car fully laden.
Then, check / re-set the camber.



As for the Ti turnbuckles, they're in stock at HPI, so you should be able to ask your local model shop over the weekend to get you some in.