Quote:
Originally Posted by Mike Hudson
make sure he's using thick double sided tape atleast 1 or 2mm thick and the reciever is normally mounted infront of the motor or just behind the servo by the speedo if theres room. Don't know if mounting it on the top deck is causing the problem...
|
Ditto this.
A few years back I had a reciever placed on touring car carbon fibre top deck and had a lot of problems, I was advised to use 2 thicknesses of tape to lift the reciever well off the deck. I was told that possible reasons were the static could be trying to discharge through the case of the reciever and up the ariel wire to air. Dont know if that was true but it cured the problem.