Both the original car and the Squared will work just fine with the standard B4 axles & CVDs. In some cases many customers limit the shock travel on either Losi or AE shocks to assure the bones do not pop out of the outdrives.
For those who experience that problem we suggest the #5660 axles which are made for us by M.I.P. They are identical to the axles found on the Losi xxx-BK2 and fit the AE CVD perfectly. In fact they are slightly long, requiring shims on the inside of the bearing. We have found Losi #A3016 is a good length, but you can easily make up your own shims.
Once shimmed correctly, most drivers report #5660 solves all problems of either hitting the diff nut or popping free of the outdrive, and allow all the droop you want.
Perhaps one of the Boyz will point out any flaw in my explanation. I make the parts and sell them. They install and run 'em. The usual circle: production dept knows nothing about R & D, which knows nothing about marketing, which never talks to production. Amazing how that happens in the world's smallest R/C company... LOL
|