Quote:
Originally Posted by hopsing
Basically what I have found with this set up is this...............If you are running the RB5 with the stock "narrow" arms, do not change the axles out. If you are running the mid-arm/worlds conversion, you have the option to either run the new axles or not. The new axles are approx 2mm shorter than the currently used axle (assuming you arent using the "proline" axle). Basically, this set up with the axles will narrow the car back up to the width of the original RB5 while utilizing the longer arms of the worlds kit. You can run the new wheels without changing the axles as well. Nothing will change running the new wheels on your car as is.
|
Quote:
Originally Posted by Fabs
Well,
If the rim has exactly the same offset as the old ones then I don't see why you couldn't use the old ones with the new Axle, and vice versa.
|
Yup, I said that already 
__________________
Steve Butts
Team Durango USA, AKA Racing, Speed Passion USA,Racers Edge, Savox, TrackStar RC
|