Quote:
Originally Posted by samd
I hope someone that knows can help me with this.
I want to run a 5.5 in dual mode with a timing advance of 0deg.
On the RS pro I have read that in sensored mode the timing is endell timing + 'secret' 15deg so to keep timing the same when the RS Pro switches to sensorless mode does timing on the hotwire need to be set at 50?
So motor runs 0deg+15deg in sensored then 15deg(50 on hotwire) in sensorless to keep it the same?
Hope this make sense and someone knows! TA
|
I think i know what you are asking but i'm not sure why you want to do that? Its not a bad thing to have different timing at a different stage in the motors rev range. If you want grunt off the line low timing will help that, but if you want it to rev higher at the end of the straight the high timing on the sensorless mode will help.
I think Randy may be able to confirm your figures above but i think they are right.
As Fabs said you want you dual mode timing up higher than 50%, i run 80% (standard timing on motor) and never change it now.