LRP 5300
I have just fitted a 5300 in my S! SX. I have fitted it upside down as you can with the lrp lipo. The unly snag was the left bottom battery lump is a tight fit near the pullys. Now I am not saying you should do this but I have carefully trimmed down the lug off the case. The lugs are hollow so it does leave a hole. I was very carefull when doing this !! And I have fiber taped over the hole ! I then glued the lipo retainers as usual to the underside. But the alternative is to drill holes in the chassis so they sit in properly ? So its either chassis or one lug.
__________________
Weight loss only requires one frame of mind
" DO OR DO NOT ! THERE IS NO TRY "
|