OK here's the data
Pack 4 was left for 2 weeks @ full charge for 2 weeks since Worksop
checked charged and it drew something like 0.5 amps for 30secs or so before tripping out.
graph shows line colour and time of discharge to the right
1st pic is just the cell volts over 3 discharges
2nd pic shows individual cell volts over 3 discharges
pack was charged @ 3.2a to 8.4v and discharged to 3v per cell as Pro-Trak will allow this using a cell cut off of 3v
pack was balance charged between each discharge.
PT graphing software tripped on discharge 3 and had to restart discharge hence the slightly shorter run time. Volts seem to be OK for second & third discharge though for most of the graph
09:47:14 D/CAP TIME SPREAD PV1
PACK 4 3500 420 3 6.61
CELL1/ 0 3475 417 3 3.29
CELL2/ 0 3500 420 0 3.32
11:41:55 D/CAP TIME SPREAD PV1
PACK#00 3600 432 5 6.64
CELL1/ 0 3566 427 5 3.31
CELL2/ 0 3600 432 0 3.33
13:49:04 D/CAP TIME SPREAD PV1
PACK#00 3533 423 1 6.63
CELL1/ 0 3516 421 0 3.3
CELL2/ 0 3508 420 1 3.33
|