Quote:
Originally Posted by mathsinstrument
I removed the height adjusters and changed the lower ball end to the stock CVA ends.
I am chasing around setups to get it for medium bite carpet racing. During off power entry into the corner, the rear breaks loose. On power the buggy pushes through the corners.... Any solutions?
Front - Yellow springs, 1.3mm piston, 400 Shock oil
Rear - Red springs, 1.4mm piston, 250 shock oil
No roll bars.
|
I'd say you want tamiya blue front and yellow rear. Not sure what oil you're using, but I use AE 35wt front and 30wt rear with moulded pistons.
The rear breaking away - not sure how many or if you have any limiters in the rear end but possibly not enough droop? The only time I've really changed the rear droop was to take droop away to make the rear steer more.
I always used a one way and didn't really suffer understeer on power but possibly going to harder oil in the rear might help that?
Tamiya red all round? :O softer than a soft thing!