Have a look at the setup pages, see if anything there is suitable? Mine is set up like this:
Springs - Tamiya red dot all round
Oil - 35wt all round
Front - 1 degree camber with kit hubs etc
Rear - 2 degrees camber
Roll bars - none
Running Schumacher minipins and a 6.5L motor it's fine, in fact its a bit too pointy but the back end never breaks away. I was told that the red dot springs were too stiff on the back purely because the ride height was a bit high. However, when I went to softer ones it kept sitting down on its outside rear which then lifted the front inside wheel off the track.
At the end of the day everybody's setup will be different depending on their driving style, it's just a case of experimenting to find something you are generally happy with then tweaking it to suit.
|