[jimmy]

Hi Blues,
Not tried any other hubs yet, have some 10deg on the way though.
to be honest its easy to take away steering.. you can cut your front tyres / take spikes / studs (or whatever) off, tighten your front diff a little, run a solid centre and diff in the front.
Or even run the spool in the front for the minimum of off-power steering.

If you are having a problem i would definately take off the centre one way, personally I run the front one way which does give a lot of steering, but the tracks i have been running on require a lot of steering, especially indoors sliding the back end round is required..
I have to say its a very controlable and stable car. much more than the yokomo bcs was.



Andy,
nice one!!
The screws, fun aint they... Spoke to peter moss, (proracing) and aparently his is just above min weight with the stock screws, and i think lunsford turnbuckles (shell unpainted tho).
My car has a lot of wiring and thick paint on the shell which probably pushes it higher..
The Ti screws and carbon fibre would easily take it underweight tho if i sorted those other things..
Have a new shell on the way so i'll try some fancy airbrush madness on it