its imposible not to get air in there,the only way you could get all oil and no air would be to do it submerged in oil,you have to mix the oil with the air by pumping the piston,also iv found you get more air in there doing it by the manual,it says to pull the piston all the way down then undo the cap,all this does is suck more air in,i find it better to push the piston up slowly as you undo the cap,put the cap on tight see how far the shaft comes out,if its to far push the shaft,undo the cap and keep the shaft pressed in untill a bit of oil come out,do the cap up tight and it should come out less,if its to far do it again,
all i can say is it workes for me and the shocks are smooth and all the same,
|