Quote:
Originally Posted by ongbenghui
hi hi,
any tip of fitting in lipo on RB5 ?
i got this yeah racing 4000mAhr lipo that I have problem fitting in.
There is 2 problems.
First, it is the little 2 protruding small block at the rear. This is to support the 2 screws that hold the t-block. I dunno if it make sense to file it off.
But I concern over the lack of support for the screw then.
Second is I am using GTB. Which is fairly big and the PCB plate is 0.5mm into the battery holding area.
Any advise ? many thanks.hi hi,
any tip of fitting in lipo on RB5 ?
i got this yeah racing 4000mAhr lipo that I have problem fitting in.
There is 2 problems.
First, it is the little 2 protruding small block at the rear. This is to support the 2 screws that hold the t-block. I dunno if it make sense to file it off.
But I concern over the lack of support for the screw then.
Second is I am using GTB. Which is fairly big and the PCB plate is 0.5mm into the battery holding area.
Any advise ? many thanks.
|
It maybe doesn't help too much now as you have the Lipo, but for others, the Orion 3800 30C, that is shaped is a really good fit, room for weight under the battery and just flip the battery strap over.
Have you guy used or tried the New Orion KO speedo, fit's really well too and early reports are excellent.
Cheers
Karl