Hey Chris,
Sorry for the mis confusion. The ball cups don't rub on the out drives. what I had to do is add an .120 spacer on the outside of the rear shocks to keep the aluminum CVD's from rubbing on the out drives at full compression. By doing this it limits travel and while bottoming out on flat landings is no problem, if I were to land at an angle with one rear tire landing first it could bottom the shock and that could break off the wing on that side of the shock tower. The brace seem like if this were to happen than it would disperse the energy through out the shock tower and save the wing from a break. I guess my question would when you compress your rear shock will the bone rub your out drive and if not compress you buggy's rear end at an angle and see if your chassis rear corner bottoms out before your shock and if so is the bone touching the out drive?
Cheers and thanks for the input M8.
|