Thread: CAT SX SETUPS
View Single Post
  #81  
Old 21-01-2009
tony12795 tony12795 is offline
Senior Member
 
Join Date: Aug 2006
Posts: 909
Default

Here is mine:-

Front -
Track Washers - 1mm front and back
Roll Bar - 1.2
Shock Position Mount - Middle
Shock Position Wishbone - Middle
Front Rake - 10 Degrees (Std)
Front Yoke - 7.5 degrees
Washers - 0mm
Front Link Bracket - 43mm
Washers on Hub - 0

Rear -
Wheel Base - Short
Toe In - 1.5mm Rear, .5mm front
Anti Squat Washers - 1.5mm Rear, 0.5mm Front
Rear Link Bracket - 37.5mm
Washers - 4mm
Shock Position Mount - Middle
Shock Position Wishbone - Inside
Hub Postion - Mid
Roll Bar - 1.2


Shocks

Front -
32.5wt (Sch) on 3 Holes
Schumacher greys Springs
Diaphragm - Centre cut out and removed
Ride Height - Wishbones level

Rear -
25wt (Sch) on 2 Holes
Schumacher red Springs
Diaphragm - Centre cut out and removed
Ride Height - Wishbones level

Transmission-
Rear Diff Height - High
Front Diff Height - Low
Layshaft Pulley - Pin Through
Front Drive - Diff
Gearing - 80 x 22 on Speed Passion 6.5
Internal Ratio - Std

Tyres
Yellow Mini Pin all round, Schumacher Green Inserts.
Reply With Quote