Quote:
Originally Posted by Kecky
I'm going to be running a Novak 7.5L motor on a kit spur with Lipo.
Anybody got any ideas on which size pinion i should start with?
|
Try gearing it like a 12t...and play with it from there, you should be able to gear up for a little more speed and down for a little less depending on conditions. Also be sure to double check me as the traction over there might require something a little different.
A couple other tips:
Shorter wires, use some zip ties, and dont run aluminum screws into the motor mount/center bulkhead or you might break them off.