They are made out of the highest quality 2mm cf and profesionaly milled and the perfect fit now for lipo stick packs.
The prototype was 8mm too long after abit of dimension confusion but is now finished and shortened to the correct size
The trackpower lipo in the picture is a 4900 which is 23mm high so if using lipos that have a lower height you may a need small bit of foam under the lipo battery on under the strap.
You will also there are two foams at the front of the lipo (Associated B4 battery foams) so you have 3 setup options of running you lipo to the rear, middle or front for where you want a little more weight to go.
Not ready for orders just yet though.
If you are interested and would like to be put on a reserve list then drop either Me or Andy a pm,
Watch this space...
