when the engine gets stuck at tdc due to the pinch in the new liner then lever the flywheel round from underneath with a large flat bladed screwdriver thru the chassis where you can see the flywheel,no need to take engine out.
the hyper engines come set very rich,try turning the lsn clockwise half a turn after you have cleaned it out of fuel then try again,alternatively you car pinch the fuel line hard between finger and thumb and keep pulling on the engine with glowstarter attached,this will lean the engine out,it should get to a point where its almost out of fuel in the crankcasing and fire up..its a cheating way of getting a rich engine to fire up.
no need to touch the hsn/main needle to get it to fire up.
|