my 3600 30c trakpower is about 0.2mm too high to fit under the slipper, it just fouls the heatshrink.
Im considering giving a go at shimming up the centre transmission a small amount to see if I can get it to fit. Also with the Tategoo shell it looks like it might just be possible to mount a lipo across the car, but will need to add an extra pulley near the center transmission to get the belt to run level with the chassis to pull it out of the way of the lipo which would be touching the top deck.
Alternatively you might be able to switch it and move the belt upwards to the top deck and get the lipo mounted lower, this would put the belt through more of an angle change and you would probably need a longer belt as a result.
|