Mike,
Im presuming that your an experienced driver and therefore not going into corners WAAAAY to fast?
I used to run the following in my B4:
Front
Middle on tower
Outer on arm
Outer on tower ballstud with 1mm spacer
Outer on hub
Steering knuckle in middle
Yellow minipins (outer and inner cut to suit)
Lead in nose
30' caster
0 toe
1' camber
Rear
Outer on tower
Inner on arm
Outer on hub
No ballstud washers
Std antisquat
Std rear toe
2' camber
28g lead where gearbox is
__________________
Previously:
BRCA Micro Section Chairman.
BRCA Micro National Champion.
Currently:
JQ fan.
Bellend.
Forums are better than Facebook groups 
|